New test #1

Merged
kmcc merged 5 commits from new-test into main 2026-08-11 10:44:49 +08:00
7 changed files with 1405 additions and 0 deletions
Showing only changes of commit ea7b678b37 - Show all commits
+2
View File
@@ -10,3 +10,5 @@ local.properties
# OS
.DS_Store
Thumbs.db
# 标定工具产物(wedge_gen.py 默认输出目录)
/out
+433
View File
@@ -0,0 +1,433 @@
# QFT5 光学链路方案(黑白 · 位阵列 · 陀螺仪稳定)
目标:
- **A**:相机 24 FPS 下,1 MB < 5 s(≥ 209.7 KB/s)
- **B**:相机 50~60 FPS 下,10 MB < 10 s(≥ 1048.6 KB/s)
- 相机帧率自动取系统最高值并锁死、稳定
- 手持抖动不导致丢锁重捕获
全程纯黑白(二值),不使用彩色或灰阶调制。
---
## 0. 选型结论:必须放弃 QR
| 方案 | B/画布 | @24fps | @60fps | 目标A | 目标B |
|---|---|---|---|---|---|
| QR 2×1 v40 @720p | 5 729 | 130 KB/s | 325 KB/s | 7.9 s ❌ | 32 s ❌ |
| QR 3×1 v40 @1080p | 8 593 | 193 KB/s | 463 KB/s | 5.3 s ❌ | 22.1 s ❌ |
| 位阵列 3.5 px/模块 @1080p | 15 571 | 350 KB/s | 839 KB/s | 2.9 s ✅ | 12.2 s ❌ |
| **位阵列 3.0 px/模块 @1080p** | **21 209** | 477 KB/s | **1143 KB/s** | **2.5 s ✅** | **9.0 s ✅** |
原因:QR 单符号上限 v40 = 177 模块。在 1080p 取景下相机能分辨约 330 模块/边,
单个 QR 只能用掉约 40% 的像素预算;横向排 3 个又受 16:9 宽度限制。
QR-L 本身还要付 finder/timing/format/RS 约 14% 的结构开销。
位阵列取消这三项限制:无版本上限、无 finder 图案、纠错交给喷泉码。
代价是不能再用 ZXing,需要自研采样解码器(见 §3.6,实际比 RS 解码更简单)。
**硬件前提(不满足则目标 B 无法达成,需在 App 内检测并提示):**
- 手机后摄支持 **1920×1080 ImageAnalysis @ 60 FPS**(用 `getOutputMinFrameDuration` 实测,非 flagship 常见只有 1080p30)
- 显示器 **≥ 60 Hz**,画布区可用宽度 **≥ 1824 逻辑像素**(3 显示 px/模块 × 608 模块)
- 取景需填满约 95% 画面 → 目标 B 建议使用支架
---
## 1. 需求一:相机帧率的获取、锁定与稳定
### 1.1 现有实现的三个缺陷
`MainActivity.chooseCameraFpsPlan()`(约 452 行):
1. **只读 `CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES`,没有按目标分辨率校验。**
该表是相机级能力,与具体输出尺寸无关。1080p 常见只支持 30 FPS,而 720p 支持 60。
现在的代码会对 1080p 请求一个它根本达不到的 `[60,60]`,结果要么被拒(走 fallback
丢失全部控制),要么被静默降频。
→ 必须用 `StreamConfigurationMap.getOutputMinFrameDuration(ImageFormat.YUV_420_888, size)`
算出**该尺寸的真实上限** `1e9 / minFrameDuration`,再与 AE 表求交集。
2. **没有优先选固定区间。** 排序是 `upper` 降序,所以 `[15,60]` 会排在 `[30,30]` 前面被选中。
可变区间授权 AE 在光线不足时把帧率降到 `lower`——这正是"不稳定"的根源。
→ 必须优先 `lower == upper` 的固定区间。
3. **没有验证实际达成帧率。** 请求 ≠ 实际。
### 1.2 三级锁定策略
```
L1 固定 AE 区间 CONTROL_AE_TARGET_FPS_RANGE = [max, max]
↓ 实测不达标
L2 全手动曝光(推荐) CONTROL_AE_MODE = OFF
SENSOR_FRAME_DURATION = 1e9 / fps
SENSOR_EXPOSURE_TIME = 2~4 ms
SENSOR_SENSITIVITY = ISO 200~400(按实测亮度标定一次)
↓ 设备拒绝该组合
L3 回退设备默认 + 降级目标(告知用户目标 B 不可达)
```
**L2 是真正的"锁死"**,也是本方案的推荐路径:屏幕是自发光强光源,2~4 ms 曝光完全够用;
AE 关闭后帧间隔由 `SENSOR_FRAME_DURATION` 精确决定,不再受测光波动影响。
更重要的是——**短曝光同时是防抖的第一杠杆**(见 §2.1)。
标定流程:启动时用 AE 自动跑 10 帧,读回 `CaptureResult` 的
`SENSOR_EXPOSURE_TIME` × `SENSOR_SENSITIVITY` 乘积作为曝光量基准,
再按"曝光缩到 3 ms、ISO 等比放大并夹到设备 `SENSOR_INFO_SENSITIVITY_RANGE` 上限"求解,
之后切 `AE_MODE_OFF` 固定住。
### 1.3 必须关闭 / 必须开启
| 项 | 设置 | 理由 |
|---|---|---|
| `CONTROL_VIDEO_STABILIZATION_MODE` | **OFF** | EIS 会逐帧裁切+几何形变,直接破坏单应矩阵跟踪 |
| `CONTROL_AE_ANTIBANDING_MODE` | **OFF** | 50 Hz 抗闪烁会把曝光量化到 10 ms 整数倍,与 2~4 ms 短曝光直接冲突,并把帧率钉死 |
| `NOISE_REDUCTION_MODE` | **OFF / FAST** | 强降噪会抹平单像素级模块边界 |
| `EDGE_MODE` | **OFF / FAST** | 锐化会产生振铃,制造伪模块边缘 |
| `LENS_OPTICAL_STABILIZATION_MODE` | **ON** | OIS 是光学补偿,不改成像几何,纯收益 |
| `CONTROL_AF_MODE` | 锁定后 **OFF** + 固定 `LENS_FOCUS_DISTANCE` | 连续 AF 每次搜索都产生几帧模糊 |
现有代码用 `AF_MODE_CONTINUOUS_PICTURE`(MainActivity 约 306 行)并在稳定锁定时
还周期性重新触发对焦(约 272 行)——对着固定距离的屏幕,这是纯负收益,必须改掉。
### 1.4 闭环验证("稳定下来"的判据)
用 `CaptureResult.SENSOR_TIMESTAMP` 做差分,滑动窗口 60 帧:
```
p50(Δt) → 实际帧率
p95(Δt) / p50(Δt) > 1.30 → 判定"不稳定",降一档重试
丢帧率 = count(Δt > 1.5 × p50) / N
```
三档实测都不稳定时,把目标降到"尽力而为"模式并在 UI 明示。
实测帧率必须回传给 Windows 端(通过配对二维码之外的一次性握手,或让用户手动选档),
**Windows 显示帧率 = 手机实测相机帧率**(见 §3.3,无需更精细的同步)。
---
## 2. 需求二:防抖 / 锁定不丢失
现有实现是"轴对齐矩形 + `smoothToward` 平滑 + 连续 miss 逐级扩大 + 10 次 miss 全幅重搜"
(`QrAnalyzer.decodeOptical` / `LockRect`)。三个结构性问题:
- 轴对齐矩形无法表达旋转与透视,手一歪矩形就被迫变大,分析面积和解码成本同时上升;
- ROI 只在**解码成功后**才更新,一旦 miss 就完全没有状态推进(无航位推算);
- 恢复策略是"扩大并祈祷"。
### 2.1 第一杠杆:短曝光(量化)
1080p、65° FOV → 等效焦距 **f ≈ 1507 px/rad**。运动模糊长度 = ω × t_exposure × f。
| 手持角速度 | 曝光 33 ms(自动) | 8 ms | 4 ms | 2 ms |
|---|---|---|---|---|
| 3 °/s(平稳) | 2.60 px = 0.87 模块 ❌ | 0.63 px ✅ | 0.32 px ✅ | 0.16 px ✅ |
| 10 °/s(典型手持) | **8.68 px = 2.89 模块 ❌** | 2.10 px ❌ | 1.05 px ⚠️ | 0.53 px ✅ |
| 20 °/s(明显晃动) | 17.36 px ❌ | 4.21 px ❌ | 2.10 px ❌ | 1.05 px ⚠️ |
**在 3 px/模块下,自动曝光的 33 ms 会抹掉近 3 个模块——必然解不出。**
这解释了当前"识别率不高"的相当一部分。锁到 2~4 ms 后模糊降到 1 px 以内。
判据:`blur = ω · t_exp · f < 0.7 模块`。
### 2.2 第二杠杆:陀螺仪前馈(真正的"防抖")
60 FPS 下 10 °/s 的帧间像素位移 = **4.4 px**,看似很小,但连续 10 帧漂移 44 px,
远超 `smoothToward` 的跟随带宽——这就是丢锁的直接机理。陀螺仪可以**提前**算出这个位移。
```
SensorManager.registerListener(TYPE_GYROSCOPE_UNCALIBRATED, SENSOR_DELAY_FASTEST) // ~200 Hz
环形缓冲 (timestampNanos, ωx, ωy, ωz)
对每个相机帧 t:
1. 校验 SENSOR_INFO_TIMESTAMP_SOURCE == REALTIME,
使 ImageProxy.imageInfo.timestamp 与陀螺时间戳同域(elapsedRealtimeNanos)
2. 积分 [t-1, t] 区间的角速度 → Δθ = (Δθx, Δθy, Δθz)
3. 小角近似的图像位移:
dx ≈ -f · Δθy dy ≈ f · Δθx roll ≈ Δθz
(需按 sensorOrientation / 显示旋转做一次坐标系映射)
4. 用 dx, dy, roll 预推上一帧的 4 个角标位置
5. 只在预测点 ±12 px 的窗口内做角标模板匹配
```
效果:搜索窗从"全幅" 降到 4 个 25×25 px 的小窗,即使剧烈晃动也能保持跟踪。
陀螺仪对**旋转**敏感,而手持抖动在 30 cm 距离上 90% 以上的像素位移来自旋转而非平移,
所以纯陀螺前馈就足够,不需要 IMU 融合。
### 2.3 第三杠杆:模糊门控
在解码前用陀螺仪算曝光窗口内的模糊长度。若 `blur > 0.7 模块`,
**直接跳过该帧的采样解码**,只更新位姿预测。省下的 CPU 留给清晰帧。
这比"试着解、失败、扩大 ROI"的现有策略便宜一个数量级。
### 2.4 跟踪 4 角单应,不跟踪矩形
画布四角放**同心方环**基准标(比 QR finder 更抗透视,且可做亚像素质心定位),
四边中点再各放一个辅助标 → 8 个点解 8-DOF 单应矩阵 H。
- H 直接给出"画布坐标 → 图像坐标"的完整映射,倾斜/旋转/透视全部被吸收;
- 采样时用 H 逆映射,**不需要把图像旋正**,省掉一次全帧变换;
- 8 点冗余 → 遮挡 1~2 个标仍可解(最小二乘 + RANSAC 剔除)。
### 2.5 永不完全丢锁:三级恢复
```
L1 窄窗跟踪 预测点 ±12 px 每帧,成本 ~4 × 625 px
↓ 连续 3 帧失败
L2 陀螺预测窗 预测点 ±40 px + 放宽阈值 成本 ~4 × 6400 px
↓ 持续 0.5 s 失败
L3 全幅重捕获 降采样 1/4 的粗搜 + 精定位
```
关键是**永远保留最后一次有效的 H**,L3 也以它为先验起点。
现有的"10 次 miss 后 `lockRegion = null` 全量重来"必须删掉。
### 2.6 诚实提醒
目标 B(3.0 px/模块 @1080p60)在手持下几乎不可能长时间守住。
App 应持续统计陀螺 RMS,超阈值时明确提示"请靠稳桌沿或使用支架",
并在支架模式下自动切到更激进的参数档。目标 A(3.5 px/模块 @24fps)手持可行。
---
## 3. 需求三:QFT5 位阵列格式
### 3.1 画布布局
```
┌─◎──────────────────────────────────────◎─┐ ◎ = 同心方环基准标(4 角 + 4 边中点)
│ ▓▓░░▓░▓▓░ 帧序号条纹(上) ░▓░▓▓░░▓▓ │ 帧计数 8 bit,撕裂检测用
├──────────────────────────────────────────┤
│ 条带 0 ← 独立喷泉包(头 + 数据 + CRC)│
│ 条带 1 │
◎ 条带 … ◎ 共 12 条(@1080p 每条约 28 模块高)
│ 条带 11 │
├──────────────────────────────────────────┤
│ ▓▓░░▓░▓▓░ 帧序号条纹(下) ░▓░▓▓░░▓▓ │
└─◎──────────────────────────────────────◎─┘
```
@1080p / 3.0 px/模块 → **608 × 342 模块 = 207 936 模块/画布**
减去基准标、条纹、参考网格(约 4%)与喷泉冗余(15%)→ **净 21 209 B/画布**。
### 3.2 抗撕裂的水平条带设计(本方案的关键)
卷帘快门自上而下扫描,读出耗时 T_r ≈ 16~20 ms。期间显示器换页会在某一行产生撕裂:
上半部分是显示帧 k,下半部分是 k+1。
**如果画布是一个整体(如单个大 QR),撕裂帧 100% 报废。**
改成 12 条独立水平条带后,每条带自带头部(条带序号 + 喷泉种子 + CRC),于是:
- 撕裂线只穿过 **1 条**条带 → 只损失 1/12;
- 撕裂线上方的 11 条属于帧 k,下方的属于帧 k+1,**两边都是有效的新数据**;
- 效率 = (B − T_r·f_display) / B。@60 FPS、T_r=16 ms、B=12 → **92%**。
**推论:显示帧率直接设成相机帧率即可,不需要任何显示/相机同步机制。**
这消除了整个方案里最难工程化的一环。
(条带数 B 的选择:B 越大抗撕裂越好,但每条带的头部开销占比上升。
B=12 时头部开销约 0.9%,是合理平衡点。)
### 3.3 帧序号条纹(tear guard)
上下各一条 8 格黑白条纹,编码同一个 8-bit 帧计数。解码时先读这 16 个采样点:
- 上下一致 → 整帧属于同一显示帧,全部 12 条带可信;
- 不一致 → 存在撕裂,用二分法在条带边界上定位撕裂行,只丢弃跨越它的那一条。
成本:16 次采样。收益:把"撕裂帧全废"变成"损失 1/12"。
### 3.4 参考模块网格(局部阈值)
屏幕亮度不均、镜头暗角、moiré 会让全局阈值失效。
每 **16×16 模块**嵌入一对已知的黑/白参考模块(开销 0.78%),解码时:
```
读取所有参考对 → 得到稀疏的 (black_level, white_level) 采样点
→ 双线性插值出全画布的阈值面 threshold(x,y) = (black + white) / 2
→ 每个数据模块与其所在位置的插值阈值比较
```
这同时天然抵抗屏幕 PWM 调光造成的整体亮度波动。
### 3.5 喷泉码(条带级)
每条带 = 一个独立喷泉包:
```
条带头(12 B):magic(2) | sessionId(4) | blockId(2) | seed(4)
条带数据:~1 750 B
CRC32(4 B)
```
- 文件按 **块(block)** 切分,每块 64 个源分片;
- 编码包 = 块内随机子集的 XOR,参与集合由 `seed` 经约定 PRNG 还原;
- 前 64 个包用系统码(原始分片本身),信道好时零解码开销;
- 接收端每块维护 64×64 的 GF(2) 矩阵,高斯消元求解;
- 冗余 15%(即平均收到 1.15×N 个包即可解出)。
Windows 端可直接用 `raptorq` crate;Android 端建议自研分组 XOR + 高斯消元,
两端算法必须逐位对齐(提供跨语言测试向量)。
### 3.6 采样解码器(替代 ZXing)
比 RS 解码更简单,纯整数运算:
```
1. tear guard 检查(16 次采样) → 决定丢弃哪条带
2. 模糊门控(陀螺仪) → 可能直接跳过整帧
3. 从跟踪状态取单应矩阵 H
4. 读参考网格 → 插值阈值面
5. 对每个模块:用 H 逆映射取中心点采样,与阈值比较 → 1 bit
(只取中心单点,不做邻域平均——3 px/模块下中心点信噪比已足够,速度快 3 倍)
6. 逐条带校验 CRC32 → 通过的送入喷泉解码器
```
复杂度 O(模块数),@1080p 每帧 208 K 次采样。可用 NEON 向量化,
或直接在 `ImageProxy` 的 Y 平面上按行做(内存访问连续)。
实测预算:60 FPS 下约 12.5 M 采样/s,中端 SoC 单核即可,不需要 GPU。
**并行结构**:`analyze()` 回调只做"按 H 计算 ROI 并 memcpy Y 平面"然后立即
`image.close()` 返回;采样解码与喷泉解码交给 2~3 个 worker 线程。
注意现有 `GrayFrameBuffer` 是单实例、非线程安全的,必须改成 per-worker 实例。
---
## 4. Windows 发送端
### 4.1 显示管线(必须先修)
现状:`qr.rs` 生成 1024×1024 的 `ColorImage`(RGBA)= **4 MiB/帧**,
每帧 `texture.set()` 上传 GPU;`optical_cache.rs` 按 4 MiB/页 计算容量,
最多占用 **768 MiB** 内存。60 FPS 下这是 240 MB/s 的分配与上传。
改法:上传 **模块级纹理**(608×342 = 208 KB 灰度),用 `TextureOptions::NEAREST`
让 GPU 放大。绘制矩形边长取模块数的整数倍(608 × 3 = 1824 px),避免不均匀缩放。
- 纹理上传:4 MiB → 208 KB(**减少 95%**,且不随显示尺寸增长)
- 预编码缓存:768 MiB → < 20 MiB
- 60 FPS 变得毫无压力
### 4.2 换页时序
现有 `last_advance.elapsed() >= interval` 轮询会产生抖动。
改为**按 vsync 计数换页**:60 Hz 屏每 1 个 vsync 换一页 = 精确 60 FPS;
每 2 个 vsync 换一页 = 精确 30 FPS。保证每帧显示时长完全一致。
### 4.3 显示器体检
启动光学模式时检测:刷新率、画布区可用逻辑像素宽度、DPI 缩放。
不满足"≥60 Hz 且 ≥1824 px"时,明确提示目标 B 不可达并给出当前档位的预计耗时。
### 4.4 编码吞吐
60 FPS × 21 KB = 1.27 MB/s 的 XOR + 位阵列打包。Rayon 并行下可忽略。
---
## 5. 分阶段落地
| 阶段 | 内容 | 可验证指标 | 风险 |
|---|---|---|---|
| **P1** | Windows 模块级纹理 + vsync 换页 | 稳定 60.0 页/s,内存 < 50 MiB | 低 |
| **P2** | 相机帧率三级锁定 + 闭环验证 + 关 EIS/抗闪烁 + 锁 AF | p95/p50 < 1.30,实测帧率 = 标称 | 低 |
| **P3** | 手动曝光 2~4 ms + 陀螺仪前馈 + 模糊门控 | 10 °/s 晃动下不丢锁,模糊 < 1 px | 中 |
| **P4** | QFT5 画布格式 + 单应跟踪 + 采样解码器 | 单帧 208 K 模块解码 < 12 ms | **高** |
| **P5** | 条带喷泉码(两端对齐 + 跨语言测试向量) | 收包 1.15×N 即可还原 | 中 |
| **P6** | 1080p60 + tear guard + 参数调优 | 目标 A / B 达标 | 中 |
P1、P2 可以立刻做且零协议风险;P4 是主要工程量(估计是全部工作量的一半)。
**建议在 P4 之前先做一个离线验证台**:Windows 端把画布导出成 PNG 序列,
Android 端加一个"从相册读图解码"的调试入口,先在无相机噪声的条件下
把采样解码器和喷泉码调通,再接实时相机。这能省掉大量难以复现的现场调试。
---
## 5.1 P0 · 分辨率楔形标定(已实现)
上表所有数字都建立在一个未经实测的假设上:**px/模块 的真实下限**。
合成实验显示这个值仅因对焦质量不同就能在 3.1~5.7 之间摆动,
所以它必须先测出来,不能靠推算。工具已在 `scripts/` 下:
```bash
# 1. 生成标定图(尺寸填显示器的设备像素)
python scripts/wedge_gen.py --width 1920 --height 1080 --out out/wedge
# 2. 用浏览器打开 out/wedge.html,按 F11 全屏
# 页面左上角必须显示「缩放 1.000 ✅」,否则测量无效
# 3. 手机拍照:大致正立,四个黑色角标全部入画并尽量填满画面
# 建议在 2~4 个不同距离各拍一张
# 4. 分析
python scripts/wedge_analyze.py --spec out/wedge.json --photo IMG_0001.jpg
```
输出每条带的 **实测 px/模块 → 对比度 → 误码率**,并给出 BER=1e-3 的临界点,
以及按该临界点换算的画布净载荷与各帧率下的预计传输耗时。
`--analysis-width` 默认 1920,即把 12MP 原片降采样到 1080p,模拟真实的
ImageAnalysis 流;改成 1280 可直接对比 720p 分析流的能力差距。
自检(合成相机模型,无需硬件):`python scripts/wedge_selftest.py`。
### 标定结果如何反馈到本方案
| 实测临界 px/模块 | 结论 |
|---|---|
| ≤ 2.6 | 目标 B 有余量,可考虑 §5.2 的六边形点阵进一步加码 |
| 2.6 ~ 3.2 | 按本方案原样实施,目标 B 余量约 10% |
| 3.2 ~ 4.0 | 目标 B 不可达;目标 A 仍可达。需下调指标或提高分析分辨率 |
| > 4.0 | 光学链路能力远低于预期,应优先排查对焦/曝光(§1.2、§2.1) |
### 一个必须修正的设计细节
标定工具的误码率输出暴露了 §3.5 的一个缺口:**条带只有 CRC,没有内码**。
1750 B 的条带有约 14 000 bit,只要 1 bit 错就整条报废。
若要求带错率 < 13%(喷泉码 15% 冗余能承受的上限),
原始 BER 必须低于 **1e-5**——这对光学信道是很苛刻的。
因此条带内部必须加**内码**,形成"内码纠错 + 外层喷泉码纠删"的级联结构
(与 QR 内部用 RS 是同一思路)。粗估所需冗余 ≈ 48 × BER:
| 实测原始 BER | 内码冗余 |
|---|---|
| 1e-5 | 可省略 |
| 1e-4 | ~0.5% |
| 1e-3 | ~4.8% |
| 1e-2 | ~48%(此工作点不可用) |
`wedge_analyze.py` 已按此公式输出所需内码冗余,并计入净载荷估算。
---
## 6. 达标核算与回退
### 达标条件(目标 B)
```
1080p ImageAnalysis @ 60 FPS × 21 209 B/画布 × 92% 撕裂效率
= 1 143 KB/s → 10 MB / 9.0 s ✅(余量 10%)
```
余量只有 10%,任一环节退化都会掉出指标。必须全部满足:
手机支持 1080p60 分析、显示器 ≥60 Hz、3.0 px/模块下解码成功率 > 95%、使用支架。
### 达标条件(目标 A)
```
1080p @ 24 FPS × 15 571 B/画布(3.5 px/模块) × 96%
= 350 KB/s → 1 MB / 2.9 s ✅(余量 42%)
```
余量充足,手持可行。**建议把 3.5 px/模块设为默认档。**
### 回退阶梯
App 应根据实测能力自动选档,并在 UI 明示当前档位与预计耗时:
| 档位 | 分析分辨率 | px/模块 | 相机 FPS | 吞吐 | 适用 |
|---|---|---|---|---|---|
| 极速(支架) | 1080p | 3.0 | 60 | 1143 KB/s | 目标 B |
| 标准(手持) | 1080p | 3.5 | 24~30 | 350~438 KB/s | 目标 A |
| 保守 | 720p | 3.5 | 30 | 167 KB/s | 老设备 |
| 兼容 | 720p | 4.0 | 30 | 128 KB/s | 最低保障 |
### 何时不该用光学
仓库已有 `QFTSEND2` 扫码直传(`windows/src/sender.rs`:HTTP + Range 续传 + UDP 发现),
10 MB 在局域网下是亚秒级。光学链路应明确定位为**物理隔离场景专用**,
并在选择大文件时主动提示直传方案与两者的预计耗时对比。
+1
View File
@@ -13,6 +13,7 @@ scripts = [
'android_compat_selftest.py',
'single_channel_guard_selftest.py',
'kotlin_host_smoke.py',
'wedge_selftest.py',
]
for name in scripts:
print(f'== {name} ==', flush=True)
+446
View File
@@ -0,0 +1,446 @@
#!/usr/bin/env python3
"""分析楔形标定图的照片,输出「每模块相机像素数 → 误码率」曲线。
python scripts/wedge_analyze.py --spec out/wedge.json --photo IMG_0001.jpg
流程与真实解码器完全一致,所以测出来的就是真实可用的下限:
检测四角基准标 → 解单应矩阵 → 按模块中心单点采样
→ 局部均值阈值面 → 判决 → 与期望比特比对
--analysis-width 用来模拟手机 ImageAnalysis 流的分辨率(默认 1920,即 1080p)。
照片本身通常是 12MP,直接分析会高估能力;先降采样到分析流分辨率才有意义。
"""
import argparse
import os
import sys
import numpy as np
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
from wedge_common import WedgeSpec, band_bits, module_centers_active # noqa: E402
# ---------------------------------------------------------------- 图像载入
def load_gray(path, analysis_width):
from PIL import Image, ImageOps
image = Image.open(path)
image = ImageOps.exif_transpose(image)
image = image.convert("L")
original = image.size
if analysis_width and image.width > analysis_width:
height = max(1, int(round(image.height * analysis_width / image.width)))
# BOX(面积平均)最接近相机 ISP 的降采样行为
image = image.resize((analysis_width, height), Image.BOX)
return np.asarray(image, dtype=np.float32), original
# ---------------------------------------------------------------- 连通域
def otsu(gray):
hist, _ = np.histogram(gray, bins=256, range=(0, 256))
total = hist.sum()
if total == 0:
return 128.0
levels = np.arange(256, dtype=np.float64)
w0 = np.cumsum(hist).astype(np.float64)
w1 = total - w0
s0 = np.cumsum(hist * levels)
total_sum = s0[-1]
valid = (w0 > 0) & (w1 > 0)
if not valid.any():
return 128.0
m0 = np.where(w0 > 0, s0 / np.maximum(w0, 1), 0.0)
m1 = np.where(w1 > 0, (total_sum - s0) / np.maximum(w1, 1), 0.0)
between = w0 * w1 * (m0 - m1) ** 2
between[~valid] = -1.0
return float(np.argmax(between))
def label_components(mask):
"""行程 + 并查集的连通域标记(4 连通)。返回 (labels, count)。"""
height, width = mask.shape
parent = [0]
def find(a):
while parent[a] != a:
parent[a] = parent[parent[a]]
a = parent[a]
return a
def union(a, b):
ra, rb = find(a), find(b)
if ra != rb:
parent[max(ra, rb)] = min(ra, rb)
labels = np.zeros((height, width), dtype=np.int32)
prev_runs = []
for y in range(height):
row = mask[y]
if not row.any():
prev_runs = []
continue
diff = np.diff(np.concatenate(([0], row.view(np.int8), [0])))
starts = np.flatnonzero(diff == 1)
ends = np.flatnonzero(diff == -1)
runs = []
for x0, x1 in zip(starts, ends):
parent.append(len(parent))
current = len(parent) - 1
for px0, px1, plabel in prev_runs:
if px0 < x1 and x0 < px1:
union(current, plabel)
labels[y, x0:x1] = current
runs.append((x0, x1, current))
prev_runs = runs
flat = labels.reshape(-1)
nonzero = flat > 0
if nonzero.any():
roots = np.array([find(i) for i in range(len(parent))], dtype=np.int32)
flat[nonzero] = roots[flat[nonzero]]
unique, remapped = np.unique(flat[nonzero], return_inverse=True)
flat[nonzero] = remapped + 1
count = len(unique)
else:
count = 0
return labels, count
def find_markers(gray, debug=None):
"""返回四个基准标中心(照片像素),顺序 TL, TR, BR, BL。"""
height, width = gray.shape
scale = max(1.0, width / 1200.0)
if scale > 1.0:
from PIL import Image
small = np.asarray(
Image.fromarray(gray.astype(np.uint8)).resize(
(int(width / scale), int(height / scale)), Image.BOX),
dtype=np.float32)
else:
small = gray
threshold = otsu(small)
mask = small < threshold
labels, count = label_components(mask)
if count == 0:
raise RuntimeError("照片里找不到任何暗色区域")
area_image = small.shape[0] * small.shape[1]
candidates = []
for index in range(1, count + 1):
ys, xs = np.nonzero(labels == index)
area = len(xs)
if area < 24 or area > area_image * 0.02:
continue
x0, x1 = xs.min(), xs.max() + 1
y0, y1 = ys.min(), ys.max() + 1
bw, bh = x1 - x0, y1 - y0
aspect = bw / float(bh)
if not 0.55 < aspect < 1.8:
continue
if area / float(bw * bh) < 0.72: # 实心方块
continue
# 外围一圈必须是白的(黑方块落在白底上),排除画面外的暗区与数据模块
pad = int(max(bw, bh) * 0.6) + 2
ry0, ry1 = max(0, y0 - pad), min(small.shape[0], y1 + pad)
rx0, rx1 = max(0, x0 - pad), min(small.shape[1], x1 + pad)
ring = small[ry0:ry1, rx0:rx1].copy()
inner = ring[y0 - ry0:y1 - ry0, x0 - rx0:x1 - rx0]
ring_sum = ring.sum() - inner.sum()
ring_n = ring.size - inner.size
if ring_n <= 0 or ring_sum / ring_n < threshold * 1.15:
continue
candidates.append((area, (xs.mean() + 0.5) * scale, (ys.mean() + 0.5) * scale,
bw * scale, bh * scale))
if len(candidates) < 4:
raise RuntimeError("只找到 %d 个候选基准标(需要 4 个)。"
"请让四个黑色角标全部进入画面,并保持画面明亮、对焦清晰。"
% len(candidates))
candidates.sort(key=lambda c: -c[0])
pool = candidates[:24]
pts = np.array([[c[1], c[2]] for c in pool])
sizes = np.array([max(c[3], c[4]) for c in pool])
def pick(score):
return int(np.argmax(score))
tl = pick(-(pts[:, 0] + pts[:, 1]))
br = pick(pts[:, 0] + pts[:, 1])
tr = pick(pts[:, 0] - pts[:, 1])
bl = pick(pts[:, 1] - pts[:, 0])
chosen = [tl, tr, br, bl]
if len(set(chosen)) != 4:
raise RuntimeError("角标定位歧义,请正对屏幕重拍,避免过大的倾斜")
refined = []
for index in chosen:
cx, cy, size = pts[index, 0], pts[index, 1], sizes[index]
refined.append(refine_centroid(gray, cx, cy, size))
if debug is not None:
debug["markers_raw"] = pts[chosen].tolist()
return refined
def refine_centroid(gray, cx, cy, size):
"""在全分辨率图上做灰度加权质心,取得亚像素中心。"""
half = max(4.0, size * 0.9)
x0 = int(max(0, np.floor(cx - half)))
x1 = int(min(gray.shape[1], np.ceil(cx + half)))
y0 = int(max(0, np.floor(cy - half)))
y1 = int(min(gray.shape[0], np.ceil(cy + half)))
patch = gray[y0:y1, x0:x1]
if patch.size == 0:
return (float(cx), float(cy))
level = otsu(patch)
weight = np.clip(level - patch, 0, None)
total = weight.sum()
if total <= 0:
return (float(cx), float(cy))
ys, xs = np.mgrid[y0:y1, x0:x1]
return (float((weight * xs).sum() / total) + 0.5,
float((weight * ys).sum() / total) + 0.5)
# ---------------------------------------------------------------- 几何
def homography(src, dst):
"""求解 src(4×2) → dst(4×2) 的 3×3 单应矩阵(h8 = 1)。"""
a = np.zeros((8, 8), dtype=np.float64)
b = np.zeros(8, dtype=np.float64)
for i in range(4):
x, y = src[i]
u, v = dst[i]
a[2 * i] = [x, y, 1, 0, 0, 0, -x * u, -y * u]
b[2 * i] = u
a[2 * i + 1] = [0, 0, 0, x, y, 1, -x * v, -y * v]
b[2 * i + 1] = v
h = np.linalg.solve(a, b)
return np.append(h, 1.0).reshape(3, 3)
def project(h, points):
"""单应变换。逐分量展开而非 matmul:大点集下更省内存,
也避开 BLAS 在大矩阵乘法上偶发的伪浮点警告。"""
pts = np.asarray(points, dtype=np.float64)
x = pts[..., 0]
y = pts[..., 1]
u = h[0, 0] * x + h[0, 1] * y + h[0, 2]
v = h[1, 0] * x + h[1, 1] * y + h[1, 2]
w = h[2, 0] * x + h[2, 1] * y + h[2, 2]
# w 趋近 0 表示该点被映射到无穷远(逆映射时落在画面之外),
# 夹住分母避免 inf/nan 污染后续采样。
w = np.where(np.abs(w) < 1e-12, 1e-12, w)
return np.stack([u / w, v / w], axis=-1)
def local_scale(h, x, y):
"""单应矩阵在 (x, y) 处的各向同性放大率:照片像素 / 显示像素。"""
u = h[0, 0] * x + h[0, 1] * y + h[0, 2]
v = h[1, 0] * x + h[1, 1] * y + h[1, 2]
w = h[2, 0] * x + h[2, 1] * y + h[2, 2]
dudx = (h[0, 0] * w - u * h[2, 0]) / w ** 2
dudy = (h[0, 1] * w - u * h[2, 1]) / w ** 2
dvdx = (h[1, 0] * w - v * h[2, 0]) / w ** 2
dvdy = (h[1, 1] * w - v * h[2, 1]) / w ** 2
return float(np.sqrt(abs(dudx * dvdy - dudy * dvdx)))
def bilinear(gray, points):
height, width = gray.shape
x = np.clip(points[..., 0], 0, width - 1.001)
y = np.clip(points[..., 1], 0, height - 1.001)
x0 = np.floor(x).astype(np.int32)
y0 = np.floor(y).astype(np.int32)
fx = x - x0
fy = y - y0
v00 = gray[y0, x0]
v01 = gray[y0, x0 + 1]
v10 = gray[y0 + 1, x0]
v11 = gray[y0 + 1, x0 + 1]
return (v00 * (1 - fx) * (1 - fy) + v01 * fx * (1 - fy) +
v10 * (1 - fx) * fy + v11 * fx * fy)
def box_mean(values, ky, kx):
"""边界收缩的滑动平均,用作局部阈值面。"""
rows, cols = values.shape
ky = max(1, min(ky if ky % 2 == 1 else ky - 1, rows if rows % 2 == 1 else rows - 1))
kx = max(1, min(kx if kx % 2 == 1 else kx - 1, cols if cols % 2 == 1 else cols - 1))
ry, rx = ky // 2, kx // 2
padded = np.pad(values, ((ry, ry), (rx, rx)), mode="edge")
integral = np.zeros((padded.shape[0] + 1, padded.shape[1] + 1), dtype=np.float64)
integral[1:, 1:] = padded.cumsum(axis=0).cumsum(axis=1)
total = (integral[ky:ky + rows, kx:kx + cols]
- integral[0:rows, kx:kx + cols]
- integral[ky:ky + rows, 0:cols]
+ integral[0:rows, 0:cols])
return total / float(ky * kx)
# ---------------------------------------------------------------- 分析
def analyze_band(gray, spec, band, h, threshold_window):
centers = module_centers_active(band, spec)
photo = project(h, centers)
samples = bilinear(gray, photo)
expected = band_bits(band) # 1 = 黑
threshold = box_mean(samples, threshold_window, threshold_window)
decoded = (samples < threshold).astype(np.uint8) # 比阈值暗 → 判为黑(1)
errors = int(np.count_nonzero(decoded != expected))
total = expected.size
ber = errors / float(total)
white = samples[expected == 0]
black = samples[expected == 1]
if white.size and black.size:
mw, mb = float(white.mean()), float(black.mean())
contrast = (mw - mb) / (mw + mb) if (mw + mb) > 0 else 0.0
else:
mw = mb = contrast = 0.0
cx = band.x + band.width_px / 2.0
cy = band.y + band.height_px / 2.0
px_per_module = local_scale(h, cx, cy) * band.pitch_px
return {
"index": band.index,
"pitch_px": band.pitch_px,
"px_per_module": px_per_module,
"modules": total,
"errors": errors,
"ber": ber,
"contrast": contrast,
"white": mw,
"black": mb,
}
def inner_fec_overhead(ber):
"""把给定原始误码率压到可忽略的带错率,所需的内码冗余(粗估)。
条带级 CRC 下,1750 B 的条带只要有 1 bit 错就整条报废,
因此必须用内码(RS/LDPC)先把原始 BER 吃掉,外层喷泉码只负责丢包。
GF(256) 的 RS:字节错率 ≈ 8·BER,留 3 倍余量 → 冗余 ≈ 48·BER。
"""
if ber <= 0:
return 0.0
return min(1.0, 48.0 * ber)
def verdict(ber):
if ber == 0:
return "✅ 无误码"
if ber < 1e-3:
return "✅ 可用"
if ber < 1e-2:
return "⚠️ 勉强"
return "❌ 不可用"
def crossing(rows, limit):
"""在 BER-px/模块 曲线上插值出 BER 恰好等于 limit 的位置。"""
ordered = sorted(rows, key=lambda r: r["px_per_module"])
for a, b in zip(ordered, ordered[1:]):
if a["ber"] > limit >= b["ber"]:
ya, yb = np.log10(max(a["ber"], 1e-9)), np.log10(max(b["ber"], 1e-9))
if abs(yb - ya) < 1e-12:
return b["px_per_module"]
t = (np.log10(limit) - ya) / (yb - ya)
return a["px_per_module"] + t * (b["px_per_module"] - a["px_per_module"])
return None
def write_debug_image(path, gray, spec, h, markers):
from PIL import Image, ImageDraw
image = Image.fromarray(gray.astype(np.uint8)).convert("RGB")
draw = ImageDraw.Draw(image)
for x, y in markers:
draw.ellipse([x - 9, y - 9, x + 9, y + 9], outline=(255, 40, 40), width=3)
corners = project(h, spec.active_corners())
draw.polygon([tuple(p) for p in corners], outline=(40, 220, 255))
for band in spec.bands:
rect = [(band.x, band.y),
(band.x + band.width_px, band.y),
(band.x + band.width_px, band.y + band.height_px),
(band.x, band.y + band.height_px)]
pts = project(h, rect)
draw.polygon([tuple(p) for p in pts], outline=(80, 255, 120))
image.save(path)
def main() -> int:
parser = argparse.ArgumentParser(description="分析楔形标定图照片")
parser.add_argument("--spec", required=True, help="wedge_gen.py 产出的 .json")
parser.add_argument("--photo", required=True, help="手机拍摄的照片")
parser.add_argument("--analysis-width", type=int, default=1920,
help="模拟 ImageAnalysis 流宽度,0 表示不降采样")
parser.add_argument("--threshold-window", type=int, default=17,
help="局部阈值面的窗口边长(模块数)")
parser.add_argument("--debug-image", type=str, default=None,
help="写出一张叠加了定位结果的诊断图")
args = parser.parse_args()
spec = WedgeSpec.load(args.spec)
gray, original = load_gray(args.photo, args.analysis_width)
debug = {}
markers = find_markers(gray, debug)
h = homography(spec.active_corners(), markers)
rows = [analyze_band(gray, spec, band, h, args.threshold_window) for band in spec.bands]
if args.debug_image:
write_debug_image(args.debug_image, gray, spec, h, markers)
width_px = float(np.hypot(markers[1][0] - markers[0][0], markers[1][1] - markers[0][1]))
print("照片:%s" % os.path.basename(args.photo))
print("原始尺寸 %d×%d → 分析尺寸 %d×%d" % (original[0], original[1], gray.shape[1], gray.shape[0]))
print("标定图 active 宽 %d 显示像素 → 照片中 %.1f 像素(放大率 %.3f)"
% (spec.active_w, width_px, width_px / spec.active_w))
print()
print("%-6s %-9s %-11s %-9s %-10s %-11s %s"
% ("条带", "显示pitch", "px/模块", "对比度", "模块数", "误码率", "判定"))
for row in rows:
print("%-6d %-9d %-11.2f %-9.3f %-10d %-11s %s"
% (row["index"], row["pitch_px"], row["px_per_module"], row["contrast"],
row["modules"],
"0" if row["ber"] == 0 else "%.2e" % row["ber"],
verdict(row["ber"])))
print()
limit = crossing(rows, 1e-3)
if limit is not None:
print("BER=1e-3 的临界点:约 %.2f px/模块" % limit)
usable = [r for r in rows if r["ber"] < 1e-3]
if usable:
best = min(usable, key=lambda r: r["px_per_module"])
print("本次实测可用下限:%.2f px/模块(BER %s,内码冗余需 %.1f%%)"
% (best["px_per_module"],
"0" if best["ber"] == 0 else "%.1e" % best["ber"],
inner_fec_overhead(best["ber"]) * 100))
area = gray.shape[0] * gray.shape[1] * 0.95
modules = area / best["px_per_module"] ** 2
payload = modules * (1 - 0.04) * (1 - 0.15 - inner_fec_overhead(best["ber"])) / 8
print("→ 按此下限,%d×%d 分析流每画布净载荷约 %.0f B"
% (gray.shape[1], gray.shape[0], max(payload, 0)))
for fps in (24, 30, 60):
rate = payload * fps * 0.92
if rate > 0:
print(" @%d FPS:%.0f KB/s 1MB %.2fs 10MB %.2fs"
% (fps, rate / 1024, 1048576 / rate, 10485760 / rate))
else:
print("所有条带都超过 1e-3,请靠近屏幕重拍,或改用更大的 --pitches")
return 0
if __name__ == "__main__":
raise SystemExit(main())
+229
View File
@@ -0,0 +1,229 @@
#!/usr/bin/env python3
"""QFT 分辨率楔形标定图 —— 共享规格、PRNG 与渲染。
用途:在屏幕上显示一张同时包含多种模块尺寸(pitch)的伪随机二值图案,
手机拍一张照片,由 wedge_analyze.py 反解出「每模块相机像素数 → 误码率」曲线,
从而实测出本套硬件真正的 px/模块 下限。这个下限直接决定 QFT5 位阵列的容量。
坐标系
------
canvas 坐标:整张标定图的像素坐标,原点左上。
active 坐标:以左上角基准标**中心**为原点的坐标系;四个基准标中心构成 active 矩形。
分析端解出的单应矩阵就是 active → 照片像素 的映射,因此所有条带几何
都用 active 坐标描述,与画布边距无关。
约定
----
- 模块 bit == 1 → 黑 (0),bit == 0 → 白 (255)。
- PRNG 为 SplitMix64,Rust / Kotlin 移植时必须逐位一致(见 splitmix64)。
- 模块 (r, c) 的比特序号 k = r * cols + c;取第 k//64 个 64 位输出的第 k%64 位(LSB 起)。
"""
from dataclasses import dataclass, asdict
from typing import List, Optional
import json
MASK64 = (1 << 64) - 1
GOLDEN = 0x9E3779B97F4A7C15
SPEC_VERSION = 1
DEFAULT_PITCHES = [10, 8, 6, 5, 4, 3, 2]
DEFAULT_SEED = 20260810
# 画布留白与基准标尺寸(canvas 像素)
MARGIN_PX = 40
MARKER_PX = 56
INSET_PX = 64 # 数据区相对 active 矩形的内缩,保证基准标周围留白
GUTTER_PX = 8 # 条带间隔
def splitmix64(state: int):
"""SplitMix64 生成器。返回 (下一状态, 64 位输出)。"""
state = (state + GOLDEN) & MASK64
z = state
z = ((z ^ (z >> 30)) * 0xBF58476D1CE4E5B9) & MASK64
z = ((z ^ (z >> 27)) * 0x94D049BB133111EB) & MASK64
return state, z ^ (z >> 31)
def band_seed(seed: int, index: int) -> int:
return (seed ^ ((GOLDEN * (index + 1)) & MASK64)) & MASK64
@dataclass
class BandSpec:
index: int
pitch_px: int
cols: int
rows: int
x: int # active 坐标
y: int
seed: int
@property
def width_px(self) -> int:
return self.cols * self.pitch_px
@property
def height_px(self) -> int:
return self.rows * self.pitch_px
@property
def modules(self) -> int:
return self.cols * self.rows
@dataclass
class WedgeSpec:
version: int
canvas_w: int
canvas_h: int
margin_px: int
marker_px: int
inset_px: int
gutter_px: int
seed: int
active_w: int # active 矩形尺寸(= 基准标中心间距)
active_h: int
bands: List[BandSpec]
def to_json(self, indent: Optional[int] = 2) -> str:
payload = asdict(self)
return json.dumps(payload, indent=indent, ensure_ascii=False)
@staticmethod
def from_dict(payload: dict) -> "WedgeSpec":
bands = [BandSpec(**b) for b in payload["bands"]]
rest = {k: v for k, v in payload.items() if k != "bands"}
return WedgeSpec(bands=bands, **rest)
@staticmethod
def load(path) -> "WedgeSpec":
with open(path, "r", encoding="utf-8") as fh:
return WedgeSpec.from_dict(json.load(fh))
def marker_centers_canvas(self):
"""四个基准标中心在 canvas 坐标下的位置,顺序 TL, TR, BR, BL。"""
half = self.marker_px / 2.0
x0 = self.margin_px + half
y0 = self.margin_px + half
x1 = self.canvas_w - self.margin_px - half
y1 = self.canvas_h - self.margin_px - half
return [(x0, y0), (x1, y0), (x1, y1), (x0, y1)]
def active_corners(self):
"""active 坐标下的四角,顺序与 marker_centers_canvas 一致。"""
return [(0.0, 0.0), (float(self.active_w), 0.0),
(float(self.active_w), float(self.active_h)), (0.0, float(self.active_h))]
def build_spec(canvas_w: int = 1920,
canvas_h: int = 1080,
pitches: Optional[List[int]] = None,
seed: int = DEFAULT_SEED,
margin_px: int = MARGIN_PX,
marker_px: int = MARKER_PX,
inset_px: int = INSET_PX,
gutter_px: int = GUTTER_PX) -> WedgeSpec:
pitches = list(pitches or DEFAULT_PITCHES)
if not pitches:
raise ValueError("至少需要一个 pitch")
if any(p < 1 for p in pitches):
raise ValueError("pitch 必须 >= 1 显示像素")
active_w = canvas_w - 2 * margin_px - marker_px
active_h = canvas_h - 2 * margin_px - marker_px
data_w = active_w - 2 * inset_px
data_h = active_h - 2 * inset_px
if data_w < 64 or data_h < 64:
raise ValueError("画布太小,数据区不足")
n = len(pitches)
band_h = (data_h - (n - 1) * gutter_px) // n
if band_h < max(pitches):
raise ValueError("画布高度不足以容纳全部条带")
bands: List[BandSpec] = []
for i, pitch in enumerate(pitches):
cols = data_w // pitch
rows = band_h // pitch
if cols < 8 or rows < 2:
raise ValueError("pitch %d 下条带尺寸过小" % pitch)
bands.append(BandSpec(
index=i,
pitch_px=pitch,
cols=cols,
rows=rows,
x=inset_px,
y=inset_px + i * (band_h + gutter_px),
seed=band_seed(seed, i),
))
return WedgeSpec(
version=SPEC_VERSION,
canvas_w=canvas_w,
canvas_h=canvas_h,
margin_px=margin_px,
marker_px=marker_px,
inset_px=inset_px,
gutter_px=gutter_px,
seed=seed,
active_w=active_w,
active_h=active_h,
bands=bands,
)
def band_bits(band: BandSpec):
"""返回形状 (rows, cols) 的 uint8 数组,1 = 黑模块。"""
import numpy as np
total = band.modules
words = (total + 63) // 64
state = band.seed
out = np.empty(words, dtype=np.uint64)
for i in range(words):
state, value = splitmix64(state)
out[i] = value
bits = np.unpackbits(out.view(np.uint8).reshape(words, 8), axis=1, bitorder="little")
# view(uint8) 在小端机器上给出 LSB->MSB 的字节序,配合 bitorder="little"
# 即得到 k 递增方向的比特流。
bits = bits.reshape(-1)[:total]
return bits.reshape(band.rows, band.cols)
def render(spec: WedgeSpec):
"""渲染整张标定图,返回 (H, W) 的 uint8 灰度数组。"""
import numpy as np
canvas = np.full((spec.canvas_h, spec.canvas_w), 255, dtype=np.uint8)
# active 原点在 canvas 中的位置 = 左上基准标中心
ox = spec.margin_px + spec.marker_px / 2.0
oy = spec.margin_px + spec.marker_px / 2.0
# 四个实心黑方块基准标,中心落在 active 四角
half = spec.marker_px // 2
for cx, cy in spec.marker_centers_canvas():
x0, y0 = int(round(cx)) - half, int(round(cy)) - half
canvas[y0:y0 + spec.marker_px, x0:x0 + spec.marker_px] = 0
for band in spec.bands:
bits = band_bits(band)
block = np.repeat(np.repeat(bits, band.pitch_px, axis=0), band.pitch_px, axis=1)
px = int(round(ox + band.x))
py = int(round(oy + band.y))
canvas[py:py + block.shape[0], px:px + block.shape[1]] = np.where(block == 1, 0, 255)
return canvas
def module_centers_active(band: BandSpec, spec: WedgeSpec):
"""返回该条带全部模块中心的 active 坐标,形状 (rows, cols, 2)。"""
import numpy as np
del spec # 条带 x/y 已是 active 坐标,无需画布信息
cx = band.x + (np.arange(band.cols) + 0.5) * band.pitch_px
cy = band.y + (np.arange(band.rows) + 0.5) * band.pitch_px
gx, gy = np.meshgrid(cx, cy)
return np.stack([gx, gy], axis=-1)
+132
View File
@@ -0,0 +1,132 @@
#!/usr/bin/env python3
"""生成 QFT 分辨率楔形标定图。
python scripts/wedge_gen.py --width 1920 --height 1080 --out out/wedge
产出三个文件:
<out>.png 标定图本体(必须 1:1 显示,任何缩放都会让测量失效)
<out>.json 规格,wedge_analyze.py 用它反解几何与期望比特
<out>.html 全屏 1:1 查看器,自带缩放校验
显示方法(二选一):
A. 用浏览器打开 <out>.html,按 F11 全屏。页面会显示「缩放 1.000 ✅」才算有效。
B. 任何能保证 100% 原始像素显示的看图工具,且系统 DPI 缩放为 100%。
拍摄方法:
- 手机大致正立(旋转 < 45°),让四个黑色角标都在画面内且尽量填满画面;
- 关闭闪光灯,对焦到屏幕上;
- 建议在 2~4 个不同距离各拍一张,这样能把 px/模块 曲线的采样点连起来。
"""
import argparse
import os
import sys
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
from wedge_common import build_spec, render, DEFAULT_PITCHES, DEFAULT_SEED # noqa: E402
VIEWER_HTML = """<!doctype html>
<meta charset="utf-8">
<title>QFT 标定图 1:1 查看器</title>
<style>
html,body{margin:0;padding:0;background:#fff;overflow:hidden}
#wrap{position:absolute;inset:0;display:flex;align-items:center;justify-content:center}
img{image-rendering:pixelated;image-rendering:crisp-edges}
#hud{position:fixed;left:8px;top:8px;font:13px/1.5 ui-monospace,Consolas,monospace;
background:rgba(0,0,0,.82);color:#fff;padding:8px 12px;border-radius:6px;z-index:9}
#hud.bad{background:rgba(150,20,20,.92)}
#hud b{color:#8f8}
#hud.bad b{color:#fbb}
</style>
<div id="wrap"><img id="img" src="__PNG__" alt=""></div>
<div id="hud">测量中…(按 H 隐藏此框,F11 全屏)</div>
<script>
const img = document.getElementById('img'), hud = document.getElementById('hud');
function check(){
const dpr = window.devicePixelRatio || 1;
// 让 1 个图像像素 == 1 个设备像素
img.style.width = (img.naturalWidth / dpr) + 'px';
img.style.height = (img.naturalHeight / dpr) + 'px';
const rect = img.getBoundingClientRect();
const shownDevicePx = rect.width * dpr;
const scale = shownDevicePx / img.naturalWidth;
const screenW = Math.round(window.screen.width * dpr);
const screenH = Math.round(window.screen.height * dpr);
const fits = img.naturalWidth <= screenW && img.naturalHeight <= screenH;
const ok = Math.abs(scale - 1) < 0.002 && fits;
hud.className = ok ? '' : 'bad';
hud.innerHTML =
'图像 ' + img.naturalWidth + '×' + img.naturalHeight +
' · 屏幕设备像素 ' + screenW + '×' + screenH +
' · DPR ' + dpr.toFixed(3) +
' · 缩放 <b>' + scale.toFixed(3) + (ok ? ' ✅</b>' : ' ❌</b>') +
(fits ? '' : '<br>标定图大于屏幕,请用 --width/--height 重新生成为屏幕设备像素尺寸') +
(Math.abs(scale-1) < 0.002 ? '' : '<br>浏览器缩放不是 100%,请按 Ctrl+0 复位');
}
img.complete ? check() : img.addEventListener('load', check);
addEventListener('resize', check);
addEventListener('keydown', e => {
if (e.key === 'h' || e.key === 'H') hud.style.display = hud.style.display === 'none' ? '' : 'none';
});
</script>
"""
def main() -> int:
parser = argparse.ArgumentParser(description="生成 QFT 分辨率楔形标定图")
parser.add_argument("--width", type=int, default=1920, help="画布宽(显示设备像素)")
parser.add_argument("--height", type=int, default=1080, help="画布高(显示设备像素)")
parser.add_argument("--pitches", type=str, default=",".join(str(p) for p in DEFAULT_PITCHES),
help="各条带的模块尺寸,单位显示像素,逗号分隔(必须为整数)")
parser.add_argument("--seed", type=int, default=DEFAULT_SEED)
parser.add_argument("--out", type=str, default="out/wedge", help="输出前缀,不带扩展名")
args = parser.parse_args()
try:
pitches = [int(p) for p in args.pitches.split(",") if p.strip()]
except ValueError:
print("--pitches 必须是逗号分隔的整数", file=sys.stderr)
return 2
try:
spec = build_spec(args.width, args.height, pitches, args.seed)
except ValueError as exc:
print("规格无效:%s" % exc, file=sys.stderr)
return 2
from PIL import Image
canvas = render(spec)
out_dir = os.path.dirname(os.path.abspath(args.out))
if out_dir:
os.makedirs(out_dir, exist_ok=True)
png_path = args.out + ".png"
json_path = args.out + ".json"
html_path = args.out + ".html"
Image.fromarray(canvas).save(png_path, optimize=True)
with open(json_path, "w", encoding="utf-8") as fh:
fh.write(spec.to_json())
with open(html_path, "w", encoding="utf-8") as fh:
fh.write(VIEWER_HTML.replace("__PNG__", os.path.basename(png_path)))
print("已生成:")
print(" %s %d×%d" % (png_path, spec.canvas_w, spec.canvas_h))
print(" %s" % json_path)
print(" %s ← 用浏览器打开并按 F11 全屏" % html_path)
print()
print("条带(模块尺寸以显示像素计):")
total = 0
for band in spec.bands:
total += band.modules
print(" #%d pitch=%2d px %4d×%-3d = %6d 模块"
% (band.index, band.pitch_px, band.cols, band.rows, band.modules))
print(" 合计 %d 模块" % total)
print()
print("拍摄后运行:python scripts/wedge_analyze.py --spec %s --photo <照片>" % json_path)
return 0
if __name__ == "__main__":
raise SystemExit(main())
+162
View File
@@ -0,0 +1,162 @@
#!/usr/bin/env python3
"""楔形标定工具自检:用合成相机模型端到端验证,无需真实硬件。
合成链路刻意模拟真实拍摄里会出问题的每一环:
透视倾斜 → 镜头模糊 → 传感器面积平均降采样 → 亮度梯度 + 暗角 → 噪声 → JPEG
通过判据:
1. 四个基准标能在暗背景 + 亮度不均的场景里被找到;
2. 单应矩阵反解出的放大率与合成时用的真值一致(误差 < 1%);
3. 大 pitch 条带零误码,小 pitch 条带明显劣化(曲线单调);
4. BER=1e-3 的临界点落在合理区间。
"""
import os
import subprocess
import sys
import tempfile
import numpy as np
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
from wedge_common import build_spec, render # noqa: E402
import wedge_analyze as wa # noqa: E402
def warp_into_scene(canvas, scene_size, corners_dst):
"""把画布按给定四角透视贴进场景(逆映射 + 双线性)。"""
scene_w, scene_h = scene_size
src = [(0, 0), (canvas.shape[1], 0), (canvas.shape[1], canvas.shape[0]), (0, canvas.shape[0])]
inverse = wa.homography(corners_dst, src)
ys, xs = np.mgrid[0:scene_h, 0:scene_w]
pts = np.stack([xs.ravel(), ys.ravel()], axis=-1).astype(np.float64)
mapped = wa.project(inverse, pts)
mx, my = mapped[:, 0], mapped[:, 1]
inside = (mx >= 0) & (mx < canvas.shape[1] - 1) & (my >= 0) & (my < canvas.shape[0] - 1)
scene = np.full(scene_h * scene_w, 26.0, dtype=np.float32) # 暗背景 = 房间/边框
if inside.any():
sample = wa.bilinear(canvas.astype(np.float32), mapped[inside])
scene[inside] = sample
return scene.reshape(scene_h, scene_w)
def synth_photo(canvas, tilt=0.018, blur=1.1, scene_scale=1.5,
analysis_width=1920, noise=1.6, seed=7):
rng = np.random.default_rng(seed)
scene_w = int(canvas.shape[1] * scene_scale)
scene_h = int(canvas.shape[0] * scene_scale)
# 画布占场景约 92%,并带一点透视倾斜
mx = scene_w * 0.04
my = scene_h * 0.04
dx = scene_w * tilt
dy = scene_h * tilt
corners = [
(mx + dx, my + dy * 0.6),
(scene_w - mx, my),
(scene_w - mx - dx * 0.4, scene_h - my),
(mx, scene_h - my - dy * 0.5),
]
scene = warp_into_scene(canvas, (scene_w, scene_h), corners)
# 屏幕亮度梯度 + 镜头暗角
ys, xs = np.mgrid[0:scene_h, 0:scene_w]
gradient = 1.0 - 0.16 * (xs / scene_w) - 0.10 * (ys / scene_h)
cx, cy = scene_w / 2.0, scene_h / 2.0
radius = np.sqrt(((xs - cx) / cx) ** 2 + ((ys - cy) / cy) ** 2)
vignette = 1.0 - 0.18 * np.clip(radius, 0, 1.4) ** 2
scene = scene * gradient * vignette
from PIL import Image, ImageFilter
image = Image.fromarray(np.clip(scene, 0, 255).astype(np.uint8))
image = image.filter(ImageFilter.GaussianBlur(radius=blur)) # 镜头 PSF + 轻微失焦
height = int(round(scene_h * analysis_width / scene_w))
image = image.resize((analysis_width, height), Image.BOX) # 传感器面积平均
array = np.asarray(image, dtype=np.float32)
array = array + rng.normal(0.0, noise, array.shape)
photo = Image.fromarray(np.clip(array, 0, 255).astype(np.uint8))
# 合成时画布 active 宽在场景中的真值放大率
active_dst = np.hypot(corners[1][0] - corners[0][0], corners[1][1] - corners[0][1])
truth_scale = active_dst / canvas.shape[1] * (analysis_width / float(scene_w))
return photo, truth_scale
def check(condition, message):
if not condition:
raise AssertionError(message)
print(" ok %s" % message)
def main() -> int:
print("== 生成标定图 ==")
spec = build_spec(1920, 1080)
canvas = render(spec)
check(canvas.shape == (1080, 1920), "画布尺寸 1920×1080")
check(set(np.unique(canvas).tolist()) == {0, 255}, "画布为纯二值")
print("== 合成相机拍摄 ==")
photo, truth_scale = synth_photo(canvas)
with tempfile.TemporaryDirectory() as tmp:
spec_path = os.path.join(tmp, "wedge.json")
photo_path = os.path.join(tmp, "photo.jpg")
with open(spec_path, "w", encoding="utf-8") as fh:
fh.write(spec.to_json())
photo.save(photo_path, quality=92)
print("== 定位与解码 ==")
gray, _ = wa.load_gray(photo_path, 0)
markers = wa.find_markers(gray)
check(len(markers) == 4, "找到 4 个基准标")
h = wa.homography(spec.active_corners(), markers)
measured = wa.local_scale(h, spec.active_w / 2.0, spec.active_h / 2.0)
expected = truth_scale
error = abs(measured - expected) / expected
print(" 放大率 真值 %.4f / 实测 %.4f / 偏差 %.2f%%" % (expected, measured, error * 100))
check(error < 0.01, "单应矩阵放大率与真值一致(<1%%)")
rows = [wa.analyze_band(gray, spec, band, h, 17) for band in spec.bands]
print()
print(" %-9s %-11s %-9s %-11s" % ("显示pitch", "px/模块", "对比度", "误码率"))
for row in rows:
print(" %-9d %-11.2f %-9.3f %-11s"
% (row["pitch_px"], row["px_per_module"], row["contrast"],
"0" if row["ber"] == 0 else "%.2e" % row["ber"]))
print()
coarse = [r for r in rows if r["px_per_module"] >= 4.0]
fine = [r for r in rows if r["px_per_module"] <= 2.2]
check(bool(coarse) and all(r["ber"] == 0 for r in coarse),
"px/模块 >= 4.0 的条带零误码")
check(bool(fine) and max(r["ber"] for r in fine) > 1e-3,
"px/模块 <= 2.2 的条带出现明显误码")
ordered = sorted(rows, key=lambda r: r["px_per_module"])
check(ordered[0]["ber"] >= ordered[-1]["ber"], "误码率随 px/模块 增大而下降")
check(all(r["contrast"] > 0.05 for r in rows), "各条带对比度为正")
limit = wa.crossing(rows, 1e-3)
check(limit is not None and 1.5 < limit < 5.0,
"BER=1e-3 临界点落在 1.5~5.0 区间(实测 %.2f)" % (limit or 0))
print()
print("== CLI 冒烟 ==")
result = subprocess.run(
[sys.executable, os.path.join(os.path.dirname(os.path.abspath(__file__)), "wedge_analyze.py"),
"--spec", spec_path, "--photo", photo_path, "--analysis-width", "0"],
capture_output=True, text=True)
check(result.returncode == 0, "wedge_analyze.py 正常退出")
check("px/模块" in result.stdout, "输出包含结果表格")
print()
print("WEDGE SELFTEST PASSED")
return 0
if __name__ == "__main__":
raise SystemExit(main())